Vizio VA22LF User Manual download pdf (Page 41)

VIZIO VA22L FHDTV10T User’s Manual

Version 9/12/2008 41

www.VIZIO.com

Troubleshooting

If your HDTV fails or the performance changes dramatically, follow the steps in the troubleshooting table

below. Remember to check peripherals as well, to pinpoint the source of the failure. If your HDTV still fails

to perform as expected, contact the VIZIO for assistance by calling 1-877-MYVIZIO (877-698-4946) or

e-mail us at [email protected].

Problem Solution

“No Signal” error message

! Press INPUT to select a different source.

No power

! Make sure the power is ON. The VIZIO logo will be white.

! Make sure the power cord is securely connected to the back of your HDTV

and the power outlet.

! Connect another electrical device into the power outlet to verify that the

outlet is supplying the proper voltage.

No sound

! Check your audio connections on the back of your HDTV and on the back of

the component.

! Make sure the volume is not turned down.

! Make sure that the sound is not muted.

! Make sure that headphones are not connected.

! Check your audio settings in the OSD. See “Adjusting the Audio Settings.”

Your HDTV audio may be set to SAP, minimum, or speakers off.

The screen is black

! Check the connections on the back of your HDTV and on the back of the

component.

! Make sure the power cord is securely connected to the back of your HDTV

and a grounded power outlet.

! Make sure the power is ON. The VIZIO logo will be white.

! Make sure that the selected input source (i.e. DVD player) is working

properly.

! If your HDTV is connected to your computer in RGB or HDMI mode, press

any key on your keyboard to “wake” your computer.

Power is ON but there is no screen

image.

! Check the connections on the back of your HDTV and on the back of the

component.

! Adjust brightness and contrast.

! Press INPUT to select a different source.

Colors are wrong or abnormal

! If any colors (red, green, or blue) are missing, check the video cable to make

sure it is securely connected.

Control buttons do not work

! Press only one button at a time.

Remote Control does not work

! Make sure batteries are inserted correctly.

! Replace expired batteries.

! Press the correct source on the remote control (i.e. TV to control the TV

source).

Image quality issues

! Standard, analog TV will always be noticeably inferior to HD because your

digital flat panel TV has video that is many times better than older TVs. You

will see interference and deficiencies you did not know you had.

! For best image quality, view HD wide screen programs where possible.

! If HD content is not available view “Standard Definition” from a digital

source.

Picture is distorted picture

! You may be getting interference from electrical appliances, cars,

motorcycles, or fluorescent lights. If you have not mounted it on the wall, try

moving your HDTV to another location to see if this is the cause of the

problem.

! You may be getting interference from a device on the same electrical circuit.

Try plugging your HDTV into another power outlet.

There is an unusual sound

! You may be getting interference from electrical appliances, cars,

motorcycles, or fluorescent lights. If you have not mounted it on the wall, try

moving your HDTV to another location to see if this is the cause of the

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 51 52

Comments to this Manuals

No comments

Vizio VA22LF User Manual Page 41

Comments to this Manuals

Related products and manuals for Televisions Vizio VA22LF